Valley Electronics Daysy Mode D'emploi page 4

6
Precautions
– Before using your Daysy for the first time, please read these instructions
carefully and keep them in a safe place for later reference.
– Before you start using your Daysy, you need to entirely discontinue hormonal
methods of birth control.
– Daysy may have difficulty recognizing your infertile days if you have an irregular
menstrual cycle.
– Daysy is not suitable for use shortly before the onset of menopause, if you are
undergoing hormonal treatment, or if you are using hormonal methods of birth
control.
– Daysy should only be used by women whose cycle is between 19 and 40 days.
– Daysy does not protect you from sexually transmitted diseases.
– You should always read your daily fertility status from Daysy itself, not the app.
– Before using Daysy for the first time, charge the battery fully.
– Never open the housing.
– Never chew on the sensor.
– Take care that the appliance or parts thereof are not swallowed.
– WARNING: The device must not be modified.
– WARNING: Avoid using Daysy at or less than 30 cm away from other electrical
equipment, as this could result in improper operation.
– WARNING: Use of cables or equipment other than those specified in this docu-
ment may cause electrical interference or lead to failure of Daysy.
– Do not expose your Daysy to high temperatures (e.g. boiling water).
– Do not expose your Daysy to direct sunlight for long periods of time.
– Only take measurements in your mouth.
– Do not insert the measuring sensor too far into your mouth.
– Do not take measurements if the housing is broken.
– Do not take measurements if you have an injury in your mouth.
– Do not expose your Daysy to heavy mechanical loads.
– Only take measurements when the USB cable is NOT connected.
– Only charge your Daysy using a standard 5V USB port (IEC 60950-1 compliant)
with a maximum output current of 1A and a maximum power of 4.5W with a cable
shorter than 50cm. Do not take measurements with your Daysy while it is charging.
7