WARNING
Excessive Weight Hazard
Use two or more people to move and assemble
workbench.
Failure to do so can result in back or other injury.
1. Stand up workbench
Using two or more people, stand the workbench upright and
place it in its final location.
1. Wash the workbench with a mild detergent and warm water. Do not allow water to remain on the workbench for any length of time.
2. Rinse completely and dry thoroughly.
There are many benefits of registering your product. Find out more and register your product online at
www.gladiatorgarageworks.com. Consumers in Canada can call 1-800-807-6777.
8
08-Feb-2018 10:19:55 EST | RELEASED
Complete the Assembly
2. Adjust leveling legs
Adjust the leveling legs as needed.
IMPORTANT: When adjusting the leveling legs, be sure they
are installed at least 1
legs.
Workbench Care
Registering Your Product
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
/
" (3.8 cm) or 12 full turns deep into the
1
2