AEG SDS51400S0 Notice D'utilisation page 39

10. Open the appliance door and the kitch-
en furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and
the furniture door and mark the holes.
11. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
12. Place the small square on the guide
again and fix it with the screws supplied.
Align the kitchen furniture door and
the appliance door by adjusting the
part (Hb).
39
Installation
8 mm
Ha
Hb
8 mm
K
Ha
Hb