Teac AI-503 Mode D'emploi page 9

A
Digital input (DIGITAL IN) connectors
USB port
Use to input digital audio from a computer . Connect it to a
computer's USB port .
Use a commercially-available USB2.0 cable (A-B type) for
this connection.
ATTENTION
Before connecting with a Windows computer, you must install
the dedicated driver on the computer (page 19) .
Proper connection is not possible with a computer that does
not have this driver installed .
RCA COAXIAL digital audio input connector
Use this to input digital audio . Connect the coaxial digital audio
output connector of a digital audio device to it .
Use a commercially-available RCA coaxial digital cable
for connection.
Optical digital audio input (OPTICAL 1) connector
Use this to input digital audio . Connect the optical digital audio
output connector of a digital audio device to it .
Use a commercially-available optical digital cable with
square connectors (TOSLINK) for connection.
B
Analog audio input (LINE 1) connectors
Use these to input analog audio . Connect the audio output
connectors of a cassette deck, CD player or other audio output
equipment to these .
Use commercially-available RCA audio cables for
connections.
Connect this unit's R input connector to the R output connec-
tor of the audio output device, and this unit's L input connector
to the L output connector of the other device .
White (L)
Red (R)
This unit
C
Preamp audio output (PRE OUT) connectors
These output analog audio after volume adjustment by this
unit .
Connect these RCA connectors to a power amplifier or speak-
ers with built-in amplifiers .
Use commercially-available RCA audio cables for
connections.
Connect this unit's R connector to the R connector of the
amplifier and its L connector to the L connector of the amplifier .
D
Power inlet (~IN)
Connect the supplied power cord here .
After all other connections are complete, connect the power
cord's plug to a wall outlet .
V
Do not use any power cord other than the one included
with this unit. Use of other power cords could result in
fire or electric shock.
V
Unplug the cord from the outlet when not using the
unit for a long time.
V
Complete all other connections before turning the
unit on.
o Carefully read the manuals of the devices that you are
connecting and follow their instructions when making
connections .
o Do not bundle connecting cables with power cords . Doing
so could cause noise .
o Connect all plugs completely .
White (L)
Red (R)
Audio output
device
EN
9