Repair & Maintenance; Environmental Protection; Declaration Of Conformity - B+BTec Diamond3 AUTOMIXER Premium Manuel D'utilisation

DIAMOND3
REPAIR & MAINTENANCE
Make sure the machine is
switched OFF and disconnected
from the power outlet.
1. Cleaning
Always clean the machine tool, bucket
and other machine parts immediately after
finishing your work using water and a
brush . Never use a pressure cleaner .
2. Storage
Keep the machine in a dry place and out
of reach of children
3. Machine failure
Never attempt to repair the machine your-
self . Have the machine repaired at author-
ized service centers .
ENVIRONMENTAL
PROTECTION
Do not dispose of the appliance
with domestic waste . Dispose of
the appliance only via an author-
ized waste management com-
pany or your municipal waste
management organisation . Adhere also to
the applicable regulations . In case of
doubt refer to your waste management
organisation . Recycle all packaging mate-
rial in an environmentally friendly manner .
AUTOMIXER
®
DECLARATION OF
CONFORMITY
We declare under our sole responsibil-
ity that this product is in conformity with
the following standards or standardiza-
tion documents: NEN-ISO 11204/
prEN 31204, NEN-ISO 3744, EN
5349-1, EN 55014-1, EN 55014-2,
EN-IEC 62841-1 according to the provi-
sions of the regulations 2006/42/EG,
2014/30/EU, 2014/35/EU .
Subject to change without prior notice .
Zevenbergen, April 2016
R .G .W . van den Boogaart
General Manager
For spare parts or advice contact
B+BTec
Munterij 8
4762 AH Zevenbergen
The Netherlands
+31 168 331 260
info@bbtectools .com
15
GB