Zipper Maschinen ZI-HAEK4100 Mode D'emploi page 34

Connection of safety switch:
13.3 Operation
13.3.1 Refuel, start, stop
See also the operation manual of the engine manufacturer
Starting the machine
ZIPPER MASCHINEN GmbH
ZI-HAEK4100 / ZI-HAEK11000
www.Zipper-Maschinen.at
1. Turn the fuel valve to the "O
position.
2. Set the engine
switch) also to the "On" position.
(only for ZI-HAEK4100)
Turn the key (1) to I-Position (only
for ZI-HAEK11000)
Note: The closed position of the choke lever
enriches the fuel mixture for starting a cold
engine. The open position provides the
correct fuel mixture for normal operation
after starting and for restarting a warm
engine.
3. Turn the choke lever to the "Closed"
position, only for cold engine.
OPERATION
"
N
/ switch (ignition
ON OFF
34