Siemens KA D Série Notice De Montage Et D'utilisation page 48

en
Note
Press both buttons simultaneously.
2. Keep pressing the Options button until "rE" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
An animation is shown in the refrigerator
compartment display for 15 seconds.
"OF" is subsequently shown in the refrigerator
compartment display.
The Home Connect settings have been reset.
Installing the Home Connect software
update
The refrigerator checks for updates to the Home
Connect software at regular intervals.
If an update is available, "UP" is shown in the
refrigerator compartment temperature display.
Press any button to return the display to the set
temperature.
Installing the update:
1. Press the Super button and the adjustment button -
simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously.
2. Keep pressing the Options button until "UP" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
An animation is shown in the refrigerator
compartment display.
The update will be installed.
All buttons are locked during the installation.
If the installation has been completed
■
successfully, "On" is shown in the refrigerator
compartment display.
If the installation has not been completed
■
successfully, "Er" is shown in the refrigerator
compartment display.
Restart the update later on.
If the installation cannot be completed after
multiple attempts, notify Customer Service.
48
Information on data protection
When your Home Connect refrigerator is connected for
the first time to a WLAN network that is connected to
the Internet, your appliance transmits the following
categories of data to the Home Connect server (initial
registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is required only when you want to
use Home Connect for the first time.
Note
Note that the Home Connect functions can be used
only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Declaration of conformity
BSH Hausgeräte GmbH hereby declares that the
appliance which features Home Connect functionality is
in accordance with the basic requirements and the
other relevant provisions of the directive 1999/5/EC.
A detailed R&TTE Declaration of Conformity can be
found online at www.siemens-home.com among the
additional documents on the product page of your
appliance.