Technical Data - WAGNER SUPER FINISH 17EX Mode D'emploi

GB
DESCRIPTION OF UNIT
PRESSURE GAUGE
The pressure gauge can be used to check the operating pres-
sure set:
A 8-12 MPa (80-120 bar)
(light yellow area)
B 12-16 MPa (120-160 bar)
(dark yellow area)
C Red marking
A
BALL VALVE
The air inlet pressure can be regulated using the ball valve. The
ball valve is mounted at the air inlet (14). It can be helpful to
reduce the ingoing air pressure during cleaning, for example.
38
For processing fluid materials
For processing viscous ma-
terials
Max. operating pressure
B
C
3.4

TECHNICAL DATA

Air inlet pressure:
minimum (recommended)
max
Max. operating pressure :
Air motor capacity
at 5 bar and 750 l/min:
Max. volume flow :
water
air
Volume flow at 8 MPa (80 bar) and
ingoing air pressure 0.6 MPa (6 bar)
water :
air:
Ambient temperature:
Air humidity
Max. temperature of the coating
material:
Ingoing air connection
Material hose connection
Max. recommended material hose
diameter
Air hose connection (AirCoat)
Max. viscosity :
Max. nozzle size
Hydraulic oil filling quantity:
Empty weight
Max. vibration at the spray gun:
Max. sound pressure level:
*Place of measurement: 1 m distance from unit and 1.60 m above
floor, 12 MPa (120 bar) operating pressure, reverberant floor
Super Finish 17ex
0.4 MPa (4 bar)
0.6 MPa (6 bar)
16 MPa (160 bar)
0.228 kW
1.6 l/min
800 nl
1.0 l/min
550 nl/min
5 °C - 40 °C
20 - 95%
43 °C
NW 7.2
1/4"-18 NPSM
3 mm
G 1/4"
15,000 mPas
0.017"
0.57 Liter
15.4 kg
lower than 2.5 m/s²
75 dB (A)*