Historique Des Modifications - RFXCOM RFXtrx433 Manuel Utilisateur

21. Historique des modifications

Version 0.0 – August 18, 2011
Initial version.
Version 1.0 – October 30, 2011
RFXflash under Mono added.
Version 2.0 – December 30, 2011
Updated for the production version with FTDI USB chip
Version 2.1 – January 18, 2012
Link for ACM to serial port added in Linux instruction.
EC Declaration of Conformity added
Version 2.2 – February 8, 2012
Protocols overview added
Screen dumps updated
Version 2.3 – February 16, 2012
Novatys planned
Version 2.4 – February 25, 2012
General information updated
Version 2.5 – March 1, 2012
Chapter added how to run RFXmngr or RFXflash on Linux.
Version 2.6 – March 14, 2012
Code tables added, Cresta, UPM added
Version 2.7 – March 15, 2012
Flash procedure updated
Version 2.8 – March 31, 2012
Phenix table added
Version 2.9 – March 31, 2012
AB400 and Phenix address extended
Version 2.10 – April 16, 2012
Linux USB - tty configuration updated
Version 2.11 – May 14, 2012
List of supported protocols updated.
Version 2.12 – June 8, 2012
Chapter added how to run RFXmngr or RFXflash on Mac OS
Version 2.13 – July 15, 2012
List of supported protocols updated
Version 2.14 – August 4, 2012
List of enabled protocols influence added
RFXtrx315 added
Version 2.15 – August 18, 2012
Enabled protocols table changed
Version 2.16 – August 26, 2012
Rubicson stektermometer added
ATI Remote Wonder II added
Version 2.17 – August 28, 2012
Table "sensitivity influenced" updated
Version 2.18 – September 18, 2012
Chapter 2.3 updated: BlindsT0 disables all other protocols
Version 2.19 – September 25, 2012
RFXFlash version required changed to 4.0.0.0
Version 2.20 – September 28, 2012
RF range reduction guide added
Version 2.21 – October 18, 2012
BlindsT2 and BlindsT3 added
Version 2.22 – October 24, 2012
Sartano added
Version 2.23 – October 31, 2012
Sensitivity table updated
Copyright 2011-2017, RFXCOM
RFXtrx FR Version 5.33 page 45 / 49