Turning Your Phone On And Off; Access Codes - LG TU915 Mode D'emploi

If a user cannot see the 'Charge complete' message, even if
battery icons are show 3 blocks, it means the phone is not
charged fully yet.
If the battery fails to charge completely:
]
After turning the phone on and off, please attempt to
recharge the battery.
]
After detaching and reattaching the battery, please attempt
to recharge the battery.

Turning Your Phone On and Off

1. Hold down the
2. If the phone asks for a PIN, enter the PIN and tap the [OK]
key.
n
Note
The display language is preset to Automatic at the factory.
To change the language, use the Languages menu, which is
located [Setting menu - Display-Languages]
When you wish to switch the phone off, hold down the
3.
[END] key until the power-off image displays.

Access Codes

You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be
changed by using the Change Codes feature.
[END] key until the phone switches on.
<<
Getting Started
15