General Features; Keypad Description; Operation Of The System; Keypad On Stand-By - Alcad MKD-900 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENG - 10

GENERAL FEATURES

The ALCAD keypad system for the control of entry points will permit you, by simply keying in a code, to open two doors independently.
Note: This code can be of 4, 5 or 6 figures. Consult your installer to find out how it is configured.
The keypad:
- Can store up to 99 codes per door.
- Using the keypad, the user himself can change the codes and configure the time the electric lock remains activated
for each code.
- has a built-in security system, so that after a certain number of failed attempts to enter a code, the keypad will remain
blocked for a predetermined length of time.
Note: These options can be disabled. Consult your installer to find out how it is configured.

KEYPAD DESCRIPTION

1- Green led (indication of door opening – position of the user menu)
2- Red led (indication of incorrect code – waiting for user code)
3- Numeric keypad (from 0 to 9)
4- Delete key
5- Door-selection key

OPERATION OF THE SYSTEM

KEYPAD ON STAND-BY

The point or points of entry that the keypad controls cannot be changed while the keypad is on standby. When any key is pressed,
an internal relay will be activated and will remain so for a period of 15 seconds. At the end of this period, the keypad will emit a beep,
indicating that the relay has been deactivated. If, when carrying out the installation, this relay was used to activate any other device,
this other device will be activated for a period of 15 seconds.
If the door-selection key is pressed, as well as activating this relay, the entrance panel will emit a confirmation sound.

OPEN DOOR 1

To open door 1, press the door-selection key marked
Then key in one of the previously-configured USER codes.
If you make an error while entering the door-opening code, press the clearing key
Note: you have 5 seconds to press another key. Once this period has expired, you must begin again at the beginning.
KEYPAD FOR ACCESS CONTROL
5
6
8
9
0
1
2
3
4
5
6
7
8
9
C
0
.
Insert code
1
2
3
4
5
6
7
8
9
C
0
Incorrect value
and begin again from the beginning.
1
1
2
3
4
5
6
7
8
9
C
0
DOOR 1
PIP, PIP
3
1
2
3
4
5
6
8
7
9
C
0
DOOR 1
BRR

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kpd-002

Table des Matières