Télécharger Imprimer la page

Makita AS001G Manuel D'instruction page 7

Souffleur à poussière sans fil
Masquer les pouces Voir aussi pour AS001G:

Publicité

Les langues disponibles

Les langues disponibles

Keep hair, loose clothing, fingers,
8.
and all parts of body away from
openings and moving parts.
Turn off all controls before removing
9.
the battery cartridge.
Use extra care when cleaning on stairs.
10.
Do not use to pick up flammable or
11.
combustible liquids, such as gaso-
line, or use in areas where they may
be present.
Recharge only with the charger
12.
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
SAVE THESE
INSTRUCTIONS.
This appliance is intended for both
household use and commercial use.
Cordless Dust Blower
Safety Instructions
Preparation
Do not wear loose clothing or jewellery that
1.
can be drawn into the air inlet. Keep long hair
away from the air inlets.
2.
Always use protective goggles, a cap and
mask when using the dust blower. Ordinary eye
or sun glasses are NOT safety glasses.
3.
To prevent dust irritation the wearing of a face
mask is recommended.
Operation in general
1.
Switch off the dust blower and remove the bat-
tery cartridge and make sure that all moving
parts have come to a complete stop
whenever you leave the dust blower.
whenever you switch from inflating to
deflating operation, and vice versa.
before checking, cleaning or working on
the dust blower.
if the dust blower starts to vibrate
abnormally.
Operate the dust blower only in daylight or in
2.
good artificial light.
3.
Do not overreach and keep proper balance and
footing at all times.
4.
Keep all cooling air inlets clear of debris.
5.
Operate the dust blower in a recommended
position and on a firm surface.
6.
Do not use the tool with wet hands.
7.
Do not point the outlet of the nozzle and
attachment to yourself or others. Objects may
be blown away and cause an injury.
8.
Do not use the tool to spray chemicals. Your
lungs may be damaged by inhaling toxic fumes.
9.
Do not operate the dust blower at high places.
10. Never block suction inlet and/or blower outlet.
Be careful not to block suction inlet or
blower outlet with dust or dirt when oper-
ating in dusty area.
Do not use nozzles other than the nozzles
provided by Makita.
11.
If the dust blower strikes any foreign objects
or should start making any unusual noise
or vibration, immediately switch off the dust
blower to stop it. Remove the battery car-
tridge from the dust blower and inspect the
dust blower for damage before restarting and
operating the dust blower. If the dust blower
is damaged, ask Makita Authorized Service
Centers for repair.
12. Do not insert fingers or other objects into
suction inlet or blower outlet.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
dust blower. Carrying the dust blower with
your finger on the switch or energizing the
dust blower that has the switch on invites
accidents.
14. Avoid operating the dust blower for a long time
in low temperature environment.
15. Do not use the tool beyond the maximum out-
put pressure of the tool. Using the tool at output
pressure greater than the maximum output pres-
sure of the tool may burst the object or the tool.
Blowing operation
1.
Never blow debris in the direction of
bystanders.
2.
Never point the nozzle at anyone in the vicinity
when using the dust blower.
Never blow dangerous materials, such as
3.
nails, fragments of glass, or blades.
Do not operate the dust blower near flammable
4.
materials.
Inflating/Deflating operation
1.
When inflating objects, connect a nozzle or
attachment to the air inlet securely. Otherwise,
the object, nozzle, or attachment may be dam-
aged and you may be injured.
2.
Release air pressure slowly. When removing
a nozzle or attachment after inflating objects,
hold the object, nozzle and attachment firmly.
They may bounce due to exhaust air and cause an
injury.
3.
Do not inflate object beyond the maximum
pressure of the object. Otherwise, the tool or
object may be damaged and you may be injured.
4.
Inflate the objects intended to be inflated by
the manufacturer only, such as beach toys or
air mattress. Inflating other objects may damage
them and cause an injury.
5.
When inflating objects, check the status of the
tool and object, and be sure that there is no air
leak from the object.
7 ENGLISH

Publicité

loading