Télécharger Imprimer la page

Velleman HQ POWER AERON 575S Notice D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

e. Mounting the Device
• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.
• The carrying construction must be able to support 10 times the weight of the device for 1 hour without
deforming.
• The installation must always be secured with a secondary attachment e.g. a safety cable.
• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified
technician check the device once a year and once before you bring it into service.
• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
• Overhead mounting requires extensive experience: calculating workload limits, determining the installation
material to be used... Have the material and the device itself checked regularly. Do not attempt to install
the device yourself if you lack these qualifications as improper installation may result in injuries.
• Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.
• Make sure there is no flammable material within a 0.5m radius of the device.
• Have a qualified electrician carry out the electric connection.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
• The installation has to be approved by an expert before the device is taken into service.
f. Fasteners
g. Fuse
• Only fit or replace a fuse when the device is unplugged from the mains.
• If the lamp burns out, chances are you will need to replace the fuse as well.
• Replace a blown fuse with a fuse of the same type and rating (see "Technical Specifications"):
1. Remove the fuse holder on the rear panel of the device.
2. Remove the old fuse and install a new one.
3. Replace the fuse holder.
5. Use
a. Detailed DMX Values per Channel
CHANNEL
FUNCTION
Channel 1
Channel 2
VDP575MHS20FL_v3
FROM
0
Shutter
128
0
64
96
128
Strobe
145
160
192
224
TO
DESCRIPTION
127
Closed
255
Open
63
No function
95
Slow to fast (max. 10 flashes/sec)
127
No function
144
Opening pulse slow to fast
159
Closing pulse slow to fast
191
No function
223
Random strobe
255
No function
4
HQPOWER

Publicité

loading

Ce manuel est également adapté pour:

Vdp575mhs20fl