Residual Heat Indication; Timer - INDU+ TOMBOY DUO UNICO Mode D'emploi Et D'installation

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and the symbol [ H ] indicates this on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
Do not touch the heating zones and do not put any heat sensitive objects on them, as long as the
residual heat indicators are switched on. There are risks of burns and fire.

Timer

The timer can be used simultaneously with all the heating zones, and this with different time
settings (from 1 to 999 minutes) for each heating zone.

Setting and modification of the cooking time :
Action
Select the power level
Select the timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.

To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.

Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts working.
When the hob is switched off, the timer continues until it has reached the selected time.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.

Automatic stop at the end of the cooking time:
As soon as the selected cooking time has finished, the timer display is blinking [ 000 ] and a
sound rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Control panel
press display [0/I]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
53
Display
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase