Samsung NaviBot SR8850 Manuel D'utilisation page 20

Fonctionnement de l'aspirateur
INSTALLING THE ROBOTIC VACUUM CLEANER
INSTALATION ORDER
1. Turning the Power Switch on or off
To use the robotic vacuum cleaner, you must turn on the Power Switch at the
bottom of the main unit.
2. Installing the Charger
the charger.
Since the battery is discharged when the product is
purchased, you must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the
robotic vacuum cleaner.
4. Réglage de l'heure
5. Installing the VIRTUAL GUARD
mode.
TURNING THE POWER SWITCH ON OR OFF
To use the robotic vacuum cleaner, you must turn the
Power Switch on.
If you turn the Power Switch off, all settings will be reset.
1. Turn over the main unit and turn the Power
Switch on.
battery charge is depleted. In this case, dock the
robotic vacuum cleaner to the charger station after
turning the Power Switch on.
the current time.
If the Power Switch is turned off, the robotic vacuum cleaner will not be charged
even if it is docked with the charger station.
ATTENTION
20_ Fonctionnement de l'aspirateur
!"#$%&&'($)*+,-.!!!/& /&(&*/*/0!!!(10(1(2!34