NEC MultiSync LCD2190UXp Manuel D'utilisation page 24

Advanced OSM Controls
Tag 7 SIDE BORDER
continued
COLOR
LED BRIGHTNESS
LED COLOR
COLORCOMP
COLORCOMP
LEVEL
Tag 8 LANGUAGE
OSM H.POSITION
OSM V.POSITION
OSM TURN OFF
OSM LOCK OUT
Adjusts the side black bars color between black and white.
For wide aspect monitors.
Controls the brightness of the LED on the front of the
monitor.
The LED on the front can be blue or green.
This function electronically compensates for the slight variations
in the white uniformity level as well as for slight differences in
color that may occur throughout the display area of the screen.
These variations are characteristic of LCD panel technology.
This function improves the color and evens out the luminance
uniformity of the display.
NOTE: Using the COLORCOMP feature does reduce the
overall peak luminance of the display. If greater luminance
is desired over the uniform performance of the display, then
COLORCOMP should be turned off.
Select the level for ColorComp adjustments.
OSM control menus are available in eight languages. Press
"Left" or "Right" to select.
You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu left, or
right.
You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu up, or
down.
The OSM control menu will stay on as long as it is in use.
You can select how long the monitor waits after the last touch of
a button to shut off the OSM control menu. The preset choices
are 10-120 seconds by 5 seconds increments. Press "Left" or
"Right" to select.
This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while in
the Lock Out mode, a screen will appear indicating the OSM
controls are locked out.
There are four ways to use OSM LOCK OUT function:
1: OSM LOCK OUT with BRIGHTNESS and CONTRAST
control: This mode locks all OSM functions except for
BRIGHTNESS and CONTRAST.
To activate, press the SELECT and "Up" buttons
simultaneously, while in the OSM menu.
To deactivate, press the SELECT and "Up" buttons
simultaneously, while in the OSM menu.
22
– continued