Cleaning; Troubleshooting; Technical Data; Disposal - BOMANN DBS 6034 CB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
WARNING:
• Always remove the mains lead before cleaning!
• Wait until the appliance has cooled down completely!
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Clean the casing with a slightly damp cloth.
Problem
Appliance does not work.
The appliance suddenly stops
working during operation.
No steam is generated.
Loud noises during steam
operation.

Technical Data

Model:............................................................... DBS 6034 CB
Power supply:.....................................220 - 240 V~, 50 - 60 Hz
Power consumption: ........................................ 2200 - 2400 W
Protection class: .....................................................................
Maximum filling quantity of the water tank: .............. 1.2 litres
Net weight: ....................................................... approx. 2.3 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibility
and low voltage directives, and is manufactured according
to the latest safety regulations.
DBS6034CB_IM

Cleaning

• Clean the sole plate and the rest with a slightly damp
• Any residual water can remain in the water tank, but

Troubleshooting

Possible Cause
Faulty mains socket.
Is the electric circuit overloaded?
The water tank has not been installed
correctly.
The temperature is set too low.
The tank is empty.
Initial start-up or after long periods of disuse.

Meaning of the "Dustbin" Symbol

This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
re-utilisation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
cloth.
should be poured out if it has been in the tank for a
prolonged period.
Remedy
Try another socket.
Check the house fuse.
Firmly push the water tank into the
base. It must audibly snap.
Select a temperature between
.
Check the tank.
Fill tank with water.
These noises of the pump are normal.

Disposal

Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
and
41
27.09.19

Publicité

Table des Matières

Dépannage

loading

Table des Matières