Honeywell HQ09 Série Mode D'emploi page 23

INSTALLATION (CONTINUED)
Note:
After setting the window bracket to the size of your window, please remove it from the window and follow
the instructions below.
3. Connect the exhaust hose to the hose connector on back of the unit. Slide-in the hose connector
downwards until it is locked in place.
4. Connect the window bracket to the window bracket panel adapter. Ensure that all connections are tight
and installed properly.
5. Connect the window bracket to the window.
6. The Honeywell Portable Local Air Conditioner is now ready to use.
Exhaust Hose:
Dia. 5.9" (15cm)
Length: 10.6" to 59" (27cm to 150cm)
EN 4