Switching Off The Burner; Operating Faults; What To Do In Case Of Malfunctioning - CAN FC Série Manuel D'instructions

Masquer les pouces Voir aussi pour FC Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GAS HOB UNITS WITH GLASS RECESSED LID ▪
SR
Some devices have specific restrictions on the maximum size of the pans that can be used. Check
if this information is in the technical data sheets reported at the beginning of this manual.
For the best efficiency of the burners, with maximum performance and minimum gas consumption,
it is recommended to use vessels of a diameter suited to the type of burner chosen.
For rational use of energy, it is recommended to cook with pans covered with the supplied lid
and to lower the flame to make and keep the water boiling, without unnecessarily overheating
the cooking liquids.

SWITCHING OFF THE BURNER

When finished cooking, switch off the appliance by placing the knob at "off".
Remove the pan from the appliance using appropriate personal safety protections.

OPERATING FAULTS

The following situations are considered operating faults and require the intervention of the Assistance
Service if:
The burner flame is yellow.
Soot is formed on the cooking utensils.
The burners do not light correctly.
The burners do not remain lit.
The burners go out when the kitchen doors are opened or closed.
It's difficult to turn the gas valves.
If the appliance does not work properly, contact the authorised local Assistance Service.

WHAT TO DO IN CASE OF MALFUNCTIONING

Before contacting the nearest Assistance Centre, carry out the following operations:
check that the hob unit is correctly connected to the system;
check that the hob unit is correctly powered;
find the appliance data on the CE plate bearing the product's serial number;
find the date and a suitable proof (invoice or till receipt) of purchase of the appliance.
ATTENTION!
While waiting to solve the problem, the appliance should not be used and should be
disconnected from all the systems it is connected to.
Do not try to repair or modify the appliance.
114
maximum and minimum admissible diameters for pots and pans
AUX
FC series
Ø MIN
SR
160
AUX
80
:
key
= Ø max pots and pans
Ø MAX
220
mm
160
mm

Publicité

Table des Matières
loading

Table des Matières