Télécharger Imprimer la page

SilverCrest 837800 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Class II construction (double insulated for additional protection)
Caution!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not
in use!
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
4
Original Instructions
Specification
Voltage: .......................................................... 220-240V~50Hz
Power: ........................................................... 45W
Nailing/Stapling speed: .................................. 20/min
Staple Type: ................................................... Type 53 (22 gauge)
Staple Length:................................................ 8-14mm
Staple Width: ................................................. 11.3mm external width
Staples codes: .............................................. 8mm(101722),
.....................................................................
.....................................................................
.....................................................................
Staple capacity: ............................................. 110 approx
Nail Type: ....................................................... Type 47 (18 gauge)
Nail Length: ................................................... 15mm
Nail Capacity: ................................................. 64 approx
Protection Class: ............................................
Ingress Protection Rating: .............................. IP20
Dimensions (L x W x H): ................................. 20 x 60 x 160mm
Power cable: .................................................. 2m
Weight: .......................................................... 0.5kg
As part of our ongoing product development, specifications of Silverline
products may alter without notice.
Sound and Vibration information:
Sound pressure(L
): ...................................... 73.82dB(A)
PA
Sound power (L
): ........................................ 84.82dB(A)
WA
Uncertainty:. .................................................. 3dB(A)
Weighted vibration: ........................................ 4.678m/s
Uncertainty: ................................................... 1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use for
the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods
of time.
10mm (101729),
12mm (101732)
& 14mm (101739)
2
2

Publicité

loading