Electrical Specifications - INTERVOX RESIDENCIA 3 Guide Utilisateur

Masquer les pouces Voir aussi pour RESIDENCIA 3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
The number of the remote parameter setting centre is programmed when the system is
installed. To make call, the administrator must confirm by pressing OK. The alarm unit
displays Unavailable if no number is programmed.
6 Settings
The Settings submenu allows the administrator to:
6.1 Enable or inhibit the audio signals generated by the siren when activating and
deactivating supervision from a keypad or remote control unit (Siren echo: Yes/No).
Press OK to toggle between YES and NO.
6.2 As an option, during installation, the alarm unit can be fitted with an extension
module allowing connection of an add-on: siren, alarm light, outdoor alarm signal, etc.
This add-on may be activated:
▲ when activating and deactivating supervision (O/P = Act/Deac: Yes/No)
▲ During a FIRE call (O/P = Fire: Yes/No)
▲ During an SOS call (O/P = SOS: Yes/No)
▲ During an intruder alarm (O/P = Siren: Yes/No).
Use the OK key to confirm the selections made.
and
Use the
keys to select submenu 6.1 or 6.2.
7 Installer
This menu is protected by a password and is reserved for the installer.

12 Electrical Specifications

Installation, servicing and maintenance of this equipment must only be
carried out by qualified and certified personnel.
▲ The equipment is designed to operate indoors at an ambient temperature between
0°C and 40°C.
▲ The equipment must not be installed in a location where there is a risk of water spray.
▲ The units and components used are self-extinguishing in compliance with standard
UL94.
▲ The equipment is classified in Class 2, i.e. it does not include a ground.
▲ The detectors use lithium batteries. Never use standard batteries.
▲ The batteries must not be shorted, modified or removed and must not be
subjected to shocks.
▲ Spent batteries must not be thrown out or burned. They must be delivered
to a disposal centre.
▲ Primary power: 230 VAC + 10% 50 Hz line power.
▲ Backup by 600 mA NIMH storage battery or equivalent.
With a constant concern for improving the quality of our products, we reserve the right to change their characteristics
at any time.
+
- 22 -

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières