Cepex CPC004 Instructions De Fonctionnement Et D'installation page 20

PROGRAMING
Start of Irrigation Cycle – START – for cyclic activation method -
In this operation the day and hour of the cyclic irrigation start of the first valve are selected.
(Under the cyclic program there is only one start time).
All the valves allocated to this
program will be opened one
after the other. When the first
shuts-down the second opens
and so forth.
The number of days until commencement of the program must also be set: 0 days –
the program will start today; 1 day – the program will commence tomorrow – and
so forth up to 30 days, when the program will commence in 30 days time.
• Switch the selector to Start
Time mode. On the
display there will appear:
START I, the last start
hour shown or OFF.
• Press- – and the hour
display will flash. With the
aid of or , set the
start hour required.
– – and the
minutes display will flash.
With the aid of
• Press – – until the number 1 and the word DAYS appears.
• With the aid of
• Allocating the valves to the program and setting the duration of the irrigation for
each valve - is identical for all modes of activation, see page 18.
or , set the start time required.
or , set the number of days until start time.
.
1 8
EN