Safety Feature; Electromagnetic Fields (Emf) - Philips HR3752 Mode D'emploi

it. Then use a spatula
(not supplied with the
product) to remove the
food from the wall.
Blender
Warning
• Never reach into the
blender jar with your
fingers or an object while
the appliance is running.
Caution
• To prevent spillage, do not
put more than 1.8 litres
of liquid in the blender
jar, especially when you
process at a high speed.
Do not put more than 1
litre in the blender jar when
you process ingredients
that tend to foam.
• Do not let the appliance
run for more than
3 minutes at a time. Let the
appliance cool down to
room temperature before
you continue blending.
• Always make sure the lid
is properly closed and
assembled on the jar
before you switch on the
appliance.
Built-in safety lock
This feature ensures that you can
only switch on the appliance if the
blender jar is assembled on the motor
unit properly. If the blender jar is not
correctly assembled, the built-in safety
lock will be locked.

Safety Feature

This blender is fitted with a safety feature
which safeguards against excessive
loads. In case of overloading, the blender
automatically activates the protection
and operation will stop and the
overloading symbol
control panel. If this occurs, set the rotary
knob to OFF, unplug the appliance and
allow it to cool down for 15 minutes.
Remove the ingredients and clean up
the blender jar before starting operation.
Electromagnetic fields
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields.
Recycling
This symbol means that this product
shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country's rules for the
separate collection of electrical and
electronic products. Correct disposal
helps prevent negative consequences
for the environment and human health.
will light up on the
EN 9