In-Call Menu; During A Call - LG M4410 Guide De L'utilisateur

In-Call Menu

Your phone provides a number of control functions
that you can use during a call. To access these func-
tions during a call, press the left soft key [Options].

During a Call

The menu displayed on the handset screen during a
call is different than the default main menu displayed
when in idle screen, and the options are described
below.
Making a Second Call (Network Dependent)
You can get a number you wish to dial from the
Address Book to make a second call. Press the Right
soft key then select Contacts.
Swapping Between Two Calls
To switch between two calls, press
soft key, and then select Swap.
Answering an Incoming Call
To answer an incoming call when the handset is ring-
ing, simply press the key. The handset is also able
to warn you of an incoming call while you are already
on a call. A tone sounds in the earpiece, and the dis-
play will show that a second call is waiting. This fea-
ture, known as Call Waiting, is only available if your
network supports it.
24
M4410
For details of how to activate and deactivate it see
Call Waiting (Menu #-3-4).
If Call Waiting is on, you can put the first call on hold
and answer the second, by pressing
Rejecting an Incoming Call
You can reject an incoming call without answering by
simply pressing the
During a call, you can reject an incoming call by
pressing the
Muting the Microphone
You can mute the microphone during a call by press-
ing the [Options] key then selecting [Mute]. The
handset can be unmuted by pressing the [Unmute].
When the handset is muted, the caller cannot hear
you, but you can still hear them.
key or the left
DTMF tones while calling
To switch on DTMF tones while calling (e.g. to use
the phone with an automatic switchboard) press the
key [Options] followed by Send DTMF – DTMF on.
Select DTMF off to disable DTMF tones. DTMF tones
are normally on.
.
key.
key.