Connecting The Subwoofer To The Mains - Loewe Individual Sound Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Connection
Connecting the speakers to the audio source
Connect the speaker wires on the bottom of the speaker. One of the two
wires of the speaker cable is marked black. Connect this black wire with the
black screw on your amplifi er or audio output, and the black terminal on the
loudspeaker.
Therefore turn the screw counterclockwise a few turns on. Run the wire end into
the screw and tighten the screw clockwise.
Connect the unmarked wires with the red terminals.
Note the marking on the left and right speaker during connection.
Speaker
wires

Connecting the subwoofer to the mains

Insert the plug at the end of the cable into the power jack at the bottom of the
speaker.
Secure the cable against accidental unplugging with the strain relief provided.
Plug the power adapter of the two speakers in one outlet with 220 - 240 V
50/60 Hz AC.
Phase
180°
-3dB
Equalizer
+6dB
50Hz
Crossover
Frequency
250Hz
min
Bass
Intensity
max
Front
Left
Power
adapter
Individual Sound Stand Speaker SL
Front
left
Power
adapter
Left
Subw Right
Rear
AudioLink
Front
Left
Right
Line In
Rear
Right
Left
Right
Center
Speaker
Out
Surround
left
Front
right
Power
adapter
Power
Mode
OFF
ON
Auto Manu.
Surround
right
13 -

Publicité

Table des Matières
loading

Table des Matières