Hkoenig GS32 Manuel D'utilisation page 4

2.Before using, put this machine on a stable and even table board, operate
according to the above methods.
3.Before juicing, first confirm juicing net and rotor clutched in position, and no hard
contact between juicing net cutter and transparent cover. Put the transparent cover
on, fasten tight the handle, then turn on the machine.
4.Before being used, the motor works in running-in phase, there may be slight
peculiar smell and spark, this is normal, after the motor works for some period, the
above phenomenon will disappear.
5.During juicing, make sure there is not too full juice and residue in the middle seat
and residue cup, if too full, please cut off power supply, clean up, then use again.
6.During using, do not open the cup cover. In case power supply is on, do not put
hand or any ware into the mixing cup or feed port, otherwise, harmful accident may
occur or this machine may be damaged.
7.In order to prolong service life of this machine, over-temperature protective device is
mounted in the motor. If the motor works for a long time or overloaded, when over
warning temperature, power supply will automatically cut off. After the motor stops,
pull out plug of power supply, wait for the motor to cool (about for 30 min), use
again.
8.During operating, please do not leave, never let children operate this machine.
9.When this machine works in mixing, mincing or grinding conditions, no-loaded or
over loaded work is strictly prohibited.
10.After operation, do not pour the food out until pull out the plug of power supply.
11.Cutters are very sharp, in order to avoid danger, when cleaning a cutter, please put
the cutter under water tap for washing, do not wash it with hand.
12.This machine must not be used for others beyond regulated purposes.
13. If the power cord is damaged, it must be replaced with an after-sales service to
avoid any danger.
※ Maintenance and cleaning
1.This machine shall be often used, so as to keep the motor dry and clean.
2.If not using for a long time, please store this machine at a dry and well-ventilated
place so as to prevent the motor from being damped and going moldy.
3.No washing the main machine. When cleaning, only wipe with wet cloth. Other
components may be washed directly with water, such as pushing bar, cover, middle
seat, residue cup, juice nozzle cover.
※ ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your
local authorities about the places where you can return this product. In fact,
electrical and electronic products contain hazardous substances that have harmful
effects on the environment or human health and should be recycled. The symbol
here indicates that electrical and electronic equipment should be chosen carefully,
a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 01