Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Install Appliance
Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE: Before installing the appliance, be sure to
verify the cabinet dimensions and electrical
connections.
Mount to Cabinet
Notes
‒
When installing two appliances side-by-side, the
door handles must be in the center.
‒
If there is no fitted shelf above the appliance,
secure the appliance against tipping over when the
door is opened. Fit two standard angles
above the appliance at 17
inside the cabinet.
1
Before installation, remove the transportation locks
which are fitted on both sides of the door. Loosen
the screws on the back and remove the
transportation locks.
2
Do not kink or trap the connecting cable, or route it
over sharp edges.
3
Centre the appliance.
There must be an air gap of
the appliance and adjacent cabinets.
4
Using a spirit level, adjust the appliance so that it is
perfectly level.
/
" (5 mm)
3
16
3
/
" (450 mm) depth
4
3
/
" (5 mm) between
16
5
Center the appliance and fix to cabinet with lower
screws. Then fit both top screws. Remove the
transportation lock from the door.
NOTICE: Use a suitable screwdriver. Be careful
not to scratch the faceplate!
7
Publicité
Table des Matières
