Table Des Matières; General Information - Hilti SF121-A Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
SF121-A battery drill driver
It is important that the operating
instructions are read before the
tool is operated.
Always keep these operating
instructions together with the tool.
Ensure that the operating instruc-
tions are with the tool when it is
given to other persons.
Operating controls and component parts
Switch with electronic speed control
Reversing switch
Two-speed switch
Torque clutch setting ring
Motor brake
Battery release button (two)
Quick-release chuck
Contents
1. General information
2. Technical data
3. General safety rules
4. Specific safety rules and Symbols
5. Functional description
6. Assembly
7. Operation
8. Care and maintenance
9. Accessories
10. Manufacturer's warranty - tools
11. Disposal
Printed: 07.07.2013 | Doc-Nr: PUB / 5070617 / 000 / 00

1. General information

In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Electrical Warning
This symbol warns of hazards as a result of the electri-
cal current when using the tool. It marks a dangerous
situation. The illustrated behavior following this symbol
must always be observed in order to help avoid serious
injury or damages to property.
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the word "tool" always
refers to the SF121-A with battery.
The following conditions must always be observed
when the tool is in use:
- The tool is for hand-held use only.
- Do not use the tool in places where the surrounding
conditions may present a risk of explosion.
Page
1
2
3
4
4
5
5
5
6
6
6
1