Télécharger Imprimer la page

Mannesmann 15033 Mode D'emploi page 17

Set d'outils à air comprimé

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
a. Remove the protector cap and screw the air hose connection into the device. Seal the
thread of the connector with the enclosed sealing tape.
b. Insert a socket into the ½" square grip of the impact screwdriver. When doing so, ensure that
the ball of the ratchet square is aligned with the hole in the locking nut.
c. Attach the compressed air hose to the air hose connector.
d. Set the rotation direction using the selector switch on top of the device (F = Forward, R =
Reverse).
e. Operate the equipment using the operating switch.
f. Apply 1-2 drops of oil regularly in the indicated locations using the enclosed oil can.
g. Clean the equipment and the sockets regularly with a dry cloth.
D) Pneumatic grinder
Technical Data
Air consumption
Operating pressure
Revolutions
Sound pressure level (LPA)
Sound power level (LWA)
Vibration
Equipment description
15. Grinding pencil
16. Chuck
17. Operating switch
18. Air hose connector
19. Grinding pencils
20. Assembly tool
a. Remove the protector cap and screw the air hose connection into the device. Seal the
thread of the connector with the enclosed sealing tape.
b. Insert a grinding pencil into the chuck of the grinder. Secure the grinding pencil with the
enclosed assembly equipment.
c. Attach the compressed air hose to the air hose connector.
d. Operate the equipment using the operating switch.
e. Apply 1-2 drops of oil regularly in the indicated locations using the enclosed oil can.
f. Clean the equipment and the sockets regularly with a dry cloth, and the grinding pencils with
a plastic brush.
In order to ensure the optimal functioning and obtain the best performance from your pneumatic
tool, please bear in mind the following points:
1. Keep your pneumatic tool clean and sufficiently lubricated. Oil it at the end of each working
day with a few drops of spindle oil into the air hose, and run it briefly so that the oil is evenly
coated over the equipment. This will avoid the build-up of rust inside the device until the next
time it is used.
abt. 113 l/min
max. 6,2 bar
-1
22,000 min
87.0 dB(A)
98.0 dB(A)
1,64 m/s²
GB - 16

Publicité

loading

Produits Connexes pour Mannesmann 15033