Mannesmann 15033 Mode D'emploi page 16

B) Pneumatic chisel
Technical Data
Air consumption
Operating pressure
Chisel stroke
Revolutions
Sound pressure level (LPA)
Sound power level (LWA)
Vibration
Equipment description
7. Chisel
8. Chisel attachment
9. Operating switch
10. Air hose connector
11. Impact force regulator screw
a. Remove the protector cap and screw the air hose connection into the device. Seal the
thread of the connector with the enclosed sealing tape.
b. Insert a chisel into the pneumatic chisel and tighten this with the enclosed feather spring by
rotating the feather spring on the thread, so that the small handle faces forward and the
chisel is securely fastened.
c. Attach the compressed air hose to the air hose connector.
d. The impact force of the pneumatic chisel can be freely adjusted using the impact force
regulator screw.
e. Operate the equipment using the operating switch.
f. Apply 1-2 drops of oil regularly in the indicated locations using the enclosed oil can.
g. Clean the equipment and the sockets regularly with a dry cloth.
C) Pneumatic ratchet
Technical Data
Air consumption
Operating pressure
Torque
Revolutions
Sound pressure level (LPA)
Sound power level (LWA)
Vibration
Equipment description
12. ½" square grip
13. Operating switch
14. Air hose connector
abt. 113 l/min
max. 6,2 bar
10 mm
-1
4500 min
96 dB(A)
107 dB(A)
13,3 m/s²
abt. 113 l/min
max. 6,2 bar
81 Nm
-1
160 min
87.0 dB(A)
98,0 dB(A)
1,67 m/s²
GB - 15