WYLER SOMECO ZEROTRONIC Série Mode D'emploi page 29

C S
PECIFICATIONS DU
C1 G
ÉNÉRALITÉS
7 5
Transceiver
T/C
Port 1
RS485
Port 2
RS485
Port 3
PC/RS232
7,5 57,5
Colour of LED
Yellow
Yellow
Green
red
Avis:
Les LED de tous les TC qui ne sont pas directement connecté à la ligne RS232 (PC) changent leur état à une
vitesse non visible. Dans ce cas la LED a l'air jaune.
TRANSCEIVER T/C
5,8/10
Port 4
Sensor A
Port 5
Sensor B
Height=35mm
Light characteristic
Continuous
Intermittent 2 sec
Continuous, to short intervals
Continuous, to short intervals
page 30 de 48
D
EN ETAIL

Automatic baudrate detection 4'800 .. 57'600 baud

Port 1 (RS485) and Port 2(RS485): RS485 Interface
for up to 32 Sensors

Port 3 (PC/RS232): RS232 Bus-Interface

Port 4 (Sensor A) and Port 5 (Sensor B): RS485
Interface for up to 5 Sensors each

Ports 3 / 4 / 5 are electrically isolated Interfaces
Distances:

Port 1 and Port 2 to Sensors: max. 15 Meters

Port 485 to next T/C (Bus): max. 1200 Meters

Port 4 and Port 5 to Sensors: max. 15 Meters

Port 3 to PC: max. 2.5 Meters
Remarks:
/// means: galvanic isolation
All 5 connectors are Binder Series 712, 8 pole female
Ready, powered, no communication
Hardware error (internal or cable)
Communication successful
Contact with PC, no answer on BUS
Function