Repeat Play; To Display Text (Super Audio Cd Only); Timer-Controlled Playback - Denon DCD-2000AE Mode D'emploi

Repeat play (Remote control unit only)
2 Playing all the tracks repeatedly
[All-track Repeat]
1 In the stop mode, press the REPEAT button
once.
• The "REPEAT ALL" indicator lights.
2
/
Press the 1 or 1
The all-track repeat mode can also be set by pressing
REPEAT
the button during playback.
The one-track repeat mode is set if the
is pressed again during repeat playback.
REPEAT
If the button is pressed during programmed
playback, the programmed
repeatedly.
To cancel the all-track repeat mode, press the
button twice.
2 Playing a single track repeatedly
[One-track Repeat]
During playback, press the REPEAT button twice.
• The "REPEAT 1" indicator lights.
REPEAT
When the button is pressed twice while in the
stop mode, the set is readied for playback of the first
track. Press the button to start playback.
1
REPEAT
Press the button once again to cancel the one-
track repeat mode. The display and playback return to
normal.

To display text (Super Audio CD only)

• With Super Audio CDs that contain text information, the
text information included on the disc can be displayed
while in the stop or play mode.
• The album title, artist name and track titles can be
displayed.
• Displayable characters are capital and small letters,
numbers and some symbols.
2 Text display in the stop mode
1
TITLE
Press the button.
• The album title scrolls on the display.
2
ARTIST
Press the button.
• The album's artist name scrolls on the display.
2 Text display in the play mode
TITLE
Press the button.
• The title of the currently playing track scrolls on the
display.
3 button.
REPEAT
button
tracks are played
REPEAT
• To switch to the display of the recorded time while text
information is being displayed, press the
TITLE ARTIST
• When the or
once, then only the first 13 characters of the text are
displayed.
• When the track is switched while the track title is being
displayed, the title of the new track is scrolled.
• "NO TEXT" is displayed if the
pressed when a disc that does not contain text information
is loaded.

Timer-controlled playback

1
Turn on the power of all system components.
2
Set the input selector on the amplifier to
correspond to the inputs the CD player is
connected to.
3
Make sure a disc has been loaded in the disc
holder.
4
Check the time on the timer and then set the
desired turn-on time.
5
Turn the audio timer ON.
Power is turned off automatically in all components
connected to the timer.
6 When the preset turn-on time is reached,
power is turned on in the system components
and CD playback starts from the first track.
10
ENGLISH
ENGLISH
Operation
TIME
mode button.
button is pressed, the text scrolls
TITLE ARTIST
or button is