Cleaning And Storage; Technical Data; Guarantee - BOMANN BS 973 CB Mode D'emploi & Garantie

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Nozzle Attachment
Crevice and
jointed nozzle:
For vacuuming upholstery, curtains and in
corners and crevices etc.
„2-in-1" nozzle: When this is folded together
it can be used as a groove nozzle. If you
would like to use the brush nozzle, pull the
brush section in the direction of the arrow
until it locks in place.
Floor nozzle:
To clean carpets or smooth surfaces.
Smooth fl oors: Press down the lever with
Carpets:
Releasing
the nozzles:
Pull these off while turning slightly.
Air Slide
Open the air slide on the hose handle in order to regulate the
airfl ow or to clear any particles sticking to the nozzle.
Dust bag replacement display (6)
Hold the hose up into air. If the dust bag change display lights
up, the bag is full. Please change it.
Changing the dust bag
Pull the plug out of the socket.
Open the lid of the dust bag compartment by the handle (7).
Remove the bag by pulling the retainer carefully upwards so
that you have easier access to the bag. Then remove the
dust bag by pulling it upwards.
Insert a new bag. Please ensure that the bag is located
correctly in the guide mechanism. Then reinsert the retainer.
Close the cover so that it snaps into place.
Filter
Your appliance has two fi lters.
Motor protection fi lter (inlet fi lter):
The inlet fi lter is located in the dust bag compartment. The fi lter
is located vertically in the rear section of the dust housing. Re-
move the fi lter by pulling upwards. Clean the engine protection
fi lter after 10 dust bag changes. If necessary, the fi lter can also
be washed in warm water without any additives. Place it back
into place only once it is completely dry!
Outlet fi lter:
The appliance is also equipped with an outlet fi lter. This fi lter is
to be found under the fi lter cover (8). Open the ventilation grille
by pressing together the lever on the side of the ventilation grille.
Then pull the grille out towards the front. Remove the fi lter and
clean as described above. Please re-insert the fi lter correctly
and close the ventilation grille (until it clicks in place).
05-BS 973 CB 25
Cleaning
Storage
the brush symbol with your
foot. The brush is now
visible.
Press the lever In the oppo-
site direction. The brushes
are now retracted.
Model:...........................................................................BS 973 CB
Power supply:............................................................230 V, 50 Hz
Power consumption:
Protection class:.......................................................................... ΙΙ
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.

Cleaning and storage

Pull the plug out of the socket before cleaning!
Clean the casing with a dry cloth.
Let the iron cool down completely.
Wind the cable completely.
If you place the vacuum cleaner in a horizontal position:
Please hang the hook on the suction tube in the parking aid
(14) on the rear of the vacuum.
If you place the vacuum cleaner in a vertical position: Please
hang the hook of the fl oor nozzle in the parking aid on the
underside of the vacuum.

Technical Data

P
:............................................................................ 1200 W
nom.
P
:............................................................................ 1600 W
max.

Guarantee

25
25.10.2006, 16:41:44 Uhr

Publicité

Table des Matières
loading

Table des Matières