Special Safety Rules - Ryobi CRH1801 Mode D'emploi

GB
FR DE ES

SPECIAL SAFETY RULES

Use auxiliary handle supplied with the tool. Loss of
control can cause personal injury.
Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
Wear a face mask or dust mask if the drilling
operation generates dust.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a «live» wire may make exposed
metal parts of the power tool «live» and could give the
operator an electric shock.
INSTRUCTIONS FOR SAFE HANDLING
Make sure that the tool is only connected to the
voltage marked on the name plate.
Never use the tool if its cover or any bolts are missing.
If the cover or bolts have been removed, replace them
prior to use. Maintain all parts in good working order.
Always secure tools when working in elevated
positions.
Never touch the blade, drill bit, grinding wheel or other
moving parts during use.
Never start a tool when its rotating component is in
contact with the work piece.
Never lay a tool down before its moving parts have
come to a complete stop.
ACCESSORIES : The use of accessories or
attachments other than those recommended in this
manual might present a hazard.
REPLACEMENT PARTS : When servicing use only
identical replacement parts.
DESCRIPTION
1. Dust Protection Cap
2. SDS Chuck
3. Clamp Collar
4. Mode Selector
5. ON / OFF Switch
6. Rotation Selector
(Forward / Reverse / Center lock)
7. Auxiliary Handle
8. Depth Gauge Rod
9. Battery Pack (not included)
10. Latches
11. To Tighten
12. To Loosen
13. Drilling Depth
IT NL PT DK SE FI NO RU PL CZ
English
14. Drill bit (not included)
15. Reverse Rotation
16. Forward Rotation
17. 35mm Chuck Adaptor (not included)
18. Screwdriver Bit (not included)
19. SDS Bit (not included)
SPECIFICATIONS
Voltage
No load speed
Hammer blows ( Blows per Minute)
Impact energy
Maximum Drill Capacity:
Wood
Steel
Concrete (hammer drilling)
Recommended hammer drilling range 4-12 mm
Bit Connection type
Weight - not incl.battery pack (Kg)
MODEL
CRH1801
OPERATION
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses with
side shields when operating products. Failure to do
so could result in objects being thrown into your
eyes, resulting in possible serious injury.
1
HU RO LV LT EE
BATTERY PACK
(not included)
BPP-1815M
BPP-1817M
BPP-1815
BPP-1817
BPL-1815
BPL-1820
BPP-1815
BPP-1817
BPP-1815M
BPP-1817M
HR SI SK GR TR
18 V
0-1000 min- 1
1
0-4000 min-
1.5J
16 mm
13 mm
12 mm
SDS-plus
2.2
CHARGER
(not included)
BCL-1800
BCS618
BCL1418
BC-1815S
BC-1800
BCA180