Publicité
Connect your other devices to the SENSE network either by using WiFi or an
Ethernet cable.
• For WiFi, go to your device settings and connect the device to the newly
created SENSE network.
• If you are using an Ethernet cable, plug it into an available port (labelled 1,
2, or 3) on the SENSE router.
Note: You can find the network name and password in the SENSE app under
Devices > Add new device.
The SENSE app installation
After setting up your SENSE network, be sure to install the SENSE app
onto all supported devices for maximum protection.
Android, iOS
Download the F-Secure SENSE app from the App store or Google Play.
Windows
Once you have connected your Windows computer to the SENSE network,
navigate your browser to http://sense.router and follow the instructions.
SENSE display
The SENSE router comes with a display that lets you know what is happening
with your connected devices.
When the display shows the time, you have nothing to worry about - SENSE
is running normally. If you see an exclamation mark, it means that SENSE has
encountered an issue and you need to open the SENSE app. It could be that
we have introduced a cool new feature or that SENSE has discovered malware.
The display also provides messages during the
setup process along with the app. The table
explains the various icons you might see.
4
English • Quick guide
Display
What it means
SENSE has no power.
No lights
The display brightness
is too low.
Whole display lit
SENSE is booting up.
Static squares
SENSE is ready for
Pulsing squares
pairing.
Pairing code. This
Four (4)
appears after you press
numbers
blue pairing button.
SENSE is connecting
Rotating squares
or verifying an action
done by the app.
Plus sign
Action completed.
Exclamation
SENSE has
mark
encountered an issue.
SENSE is updating its
Updating
software and will
restart automatically.
The SENSE router was
Reset
reset.
The SENSE router was
Factory reset
reset and restored to
factory settings.
You are online and
Time
protected.
What to do
Check that the SENSE
router is plugged in.
Change display
brightness from the app
settings.
Wait for a few minutes.
If nothing happens,
unplug the SENSE router
and then plug it in again.
If the problem persists, a
factory reset is needed.
Press the blue button on
the back of the SENSE
router.
Follow the instruction in
the SENSE app.
This may take a moment.
Follow the instruction in
the SENSE app.
No action needed. Get
ready for the next step.
Check the SENSE app.
Keep the SENSE router
plugged in and follow
the instructions in the
SENSE app.
Wait for the SENSE
router to restart and
then set it up.
Enjoy!
English • Quick guide
5
Publicité
