Inset Installations; Electrical Connection; Adjusting The Feet - Beko BFFD3624SS Manuel D'utilisation

Installation

3.3 Inset installations

cabinetry or in an alcove, be sure there is
adequate airflow around the product for proper
functionality. This refrigerator requires at least
2" from the top of the unit to the ceiling or
enclosure, 5/8" on each side and 1 3/8" in the
back.
or alcove, be sure the parts shown below are
installed on the unit.
circulation part
Install the vertical
metal bracket and screw.
The longer screw must
be used on the top.

3.4 Electrical connection

Circuit.
but any failure of the GFCI could cause
food spoilage, which is not covered by the
manufacturer's warranty.
regulations.
after installation.
or multi-plugs.
WARNING:
B
WARNING:
B should not be operated unless it is repaired
the risk of electric shock!

3.5 Adjusting the feet

recommend lowering the feet to secure the
if the product is not balanced. Twist the feet in
the desired direction according to the illustration
the doors.
WARNING:
B Product must not be plugged in when
electric shock!
13 / 29 EN
Damaged power cable must
If the product has a failure, it
First unplug the product.
Refrigerator / User Manual