Ingvart SMART BED Mode D'emploi page 9

EN
WARNING
Do not use the Mini or crib if any part is broken, torn or missing, and use only spare parts approved by INGVART.
Discontinue use of crib when child is able to climb out to minimize the risk of a child falling out of the crib.
Do not let children play unsupervised near the furniture
The lowest position of the crib base is always the safest. .
As soon as the baby can sit up or pull itself up, the crib base must be lowered to this position
Make sure the crib is locked in a fixed position when a child is unsupervised in it. (Wheels in locked position/stopper placed on the bottom part of rockers).
Make sure there are no medicines, cords, straps, elastic objects, small toys or any similar small items (e.g.: coins) that child could reach out for placed in or
near this crib.
This crib has been manufactured for use with a mattress which has following measures. ROUND: 720 mm wide by 1200 mm long and 50 mm in thick-
ness for the crib and 720 mm wide by 720 mm long and 50 mm in thickness for Mini. OVAL: 600 mm wide by 1200 mm long and 50 mm in thickness
for the crib and 600 mm wide by 710 mm long and 50 mm in thickness for Mini version of the crib. The width and length are strictly specified because it
is important that the gaps between the mattress and the sides and ends of the crib will not exceed 30 mm. This is to minimize the risk of a child's limb
becoming caught in the gap. The thickness of the mattress has been specified to ensure that the depth of the crib is greater than 500 mm with the mat-
tress base in the lower position to minimize the risk of a child climbing or falling out of the crib.
Do not use more than one mattress in the crib. Use only original mattress from INGVART to avoid any problem
7