Cleaning And Maintenance - Ingvart SMART BED Mode D'emploi

EN
Congratulations on your purchase of INGVART SMART BED ROUND/OVAL.
Thank you for purchasing our product. We sincerely believe you will be completely satisfied with it. Read these instructions carefully and follow them in
detail to ensure that the safety features of the Ingvart bed are not compromised. Keep these instructions for future reference.
INSTRUCTIONS
Pain or wood could have a distinctive odour which may linger three days after unpacking. We recommend placing the product in a well-ventilated place
at this time.
In order to properly assemble the crib, please make sure to follow assembly instructions strictly. Failure to assemble the crib in the manner recommended
could result in damage and even breakage of the product
Do not displace or move the crib if there is a child or some other objects placed in it.
Do not tighten the screws firmly until the entire unit is assembled. Doing this ensures you the easiest way to assemble.
Make sure the crib is always placed on a level and stable surface. Re-tighten and check all screws and fittings after assembly. Fittings and screws should
be checked regularly and retightened as necessary. Loose screw connections or parts could lead to the baby trapping a body part, or clothing (e.g. strings,
necklaces, ribbons for babies' dummies, etc.) which would pose a risk of strangulation.
Never place the crib by an open fire or any other sources of strong heat such as electric bar fires, gas fires, etc. due to the risk of fire.

CLEANING AND MAINTENANCE

Wipe with a clean damp cloth and wipe off excess of water. We do not recommend the use of any detergents. Please bear in mind that colours may
change if they are exposed to the sun.
6