Wehncke 12070 Mode D'emploi page 7

caused by incorrect handling (splitting or tearing of the material). Direct sun-
light increases the air pressure. If this occurs, release air through the valves until
creasing again becomes visible on the outside seam.
Cleaning and storage:
In the interests of hygiene it is important to change the pool water frequently,
particularly during hot weather and when the water looks dirty. After use care-
fully remove any dirt from the pool with a damp cloth or by spraying with clean
water. Use a gentle detergent if required, but do not scrub. Allow to thoroughly
air dry before fully deflating all chambers. Then fold up the pool, ensuring that
the material is free of sharp kinks. Store in a dry, frost-free area.
Repairs:
Small holes or tears in the fabric can be repaired using the patches enclosed.
First clean the damaged area, remove the backing to expose the adhesive
and press the patch firmly in place. For more substantial damage we recom-
mend a repair kit for inflatable which includes patches in various colours and a
special adhesive.
Disposal:
Please dispose of your pool in an environmentally safe manner at a local recy-
cling centre. The product packaging is made of recyclable materials. Please
dispose of it responsibly.
7
060_Planschbecken_Art12070_A5.indd 7 06.12.11 12:12