Teaching-In On Max! Components - eQ-3 MAX! Eco Mode D'emploi

Holes do not have to be drilled and plugs do not have
to be used for mounting on a flush-mounting box.
You can even use a frame supplied by another
manufacturer or integrate the electronic unit into
a multi-gang frame. Read the information about
compatibility in Section 10.

7. Teaching-in on MAX! Components

To activate teach-in mode, press and hold down one of
•
the buttons on the MAX! Eco Switch for at least 3 sec-
onds. The LED flashes in teach-in mode.
• Successful teaching-in of the MAX! Eco Switch is
confirmed by the LED lighting up once. If you do
not teach-in any devices, the teach-in procedure
deactivates automatically after 30 s.
a
In order to enable communication be-
tween MAX! Components, the devices
have to be taught-in to one another.
Start by switching the teach-in
•
partner (e.g. the MAX! Cube) toteach-
in mode.
a
17