Instructions For Disposal; Inserting (Replacing) Batteries - eQ-3 MAX! Eco Mode D'emploi

Do not dispose of the device with regular domestic waste.
Electronic equipment must be disposed of at
local collection points for waste electronic equip-
ment in compliance with the Waste Electrical and
Electronic Equipment Directive.
The CE Marking is simply an official symbol
relating to the free movement of a product; it does
not warrant a product's characteristics.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.

5. Inserting (replacing) batteries

Once mounted, the pushbutton can
•
easily be pulled out of the frame. To
remove the pushbutton from the frame,
take hold of the sides of the pushbut-
ton rocker and pull the pushbutton out.
You do not need to remove the rocker or
open the device.
Turn the pushbutton over.
•
After removing the old batteries , please wait approximately
•
60 seconds before inserting the new ones.
• Insert 2 LR03 (micro/AAA) batteries in the battery compartments
(making sure that you insert them the right way round).
Put the pushbutton back into the frame.
•
Never recharge standard batteries. Doing so will
present a risk of explosion. Do not throw the batter-
ies into a fire. Do not short-circuit batteries.

4. Instructions for disposal

15