Attaching The Cartridge - Technics SL-1200GR Manuel D'utilisation

Masquer les pouces Voir aussi pour SL-1200GR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
Attach a cartridge (store-bought)
tentatively.
Follow the cartridge's instructions to
correctly attach it to the head shell, and
tighten the screws lightly.
z If the mounting screws are included in
the cartridge, use them.
z When playing SP records, use a cartridge
for SP records.
z Use a commercially available mini flat
screwdriver (4 mm [
z Be careful not to touch the stylus tip.
(Example)
Washers
Cartridge
Stylus
Nuts
(Lead wire)

Attaching the cartridge

5
/
"]).
32
Screw for
cartridge
Head
shell
Lead wire
Terminal
(Terminal)
Red
R+
(Red)
Green
R-
(Green)
White
L+
(White)
L-
(Blue)
Blue
2
Adjust the overhang.
Use the included overhang gauge.
Fit the overhang gauge to the head shell.
k
Move the cartridge to line the stylus tip up
with the end of the gauge.
Stylus tip
z The cartridge should be parallel on
the shell head when viewed from the
top and side (the illustration is the top
view).
Tighten the screw for cartridge.
l
z Be careful not to allow the cartridge to
slip out of place.
The overhang can be adjusted optimally.
Head shell
Overhang gauge
52 mm
Screw for cartridge
13
(13)
English

Publicité

Chapitres

Table des Matières
loading

Table des Matières