Télécharger Imprimer la page
Technics SL-1200GR Manuel D'utilisation
Masquer les pouces Voir aussi pour SL-1200GR:

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

■ Make connection to the PHONO terminals and AC IN terminal before setting up or
installing the player.
Connecting to the PHONO terminals and AC IN terminal
Take out the player from the package, attach the "FRONT styrofoam" and place the player with its front side down so
that you can make connection to the PHONO terminals and AC IN terminal on the back side.
Connect the supplied PHONO cable (product number: K2KYYYY00257), PHONO earth lead (product number:
K4EY1YY00160), and AC power supply cord (product number: K2CG3YY00191).
Insert the AC power
supply cord up to
a point just before
the round hole.
Attention
Be careful not to tip over
the player.
■ Before fitting the turntable
There is a magnet and its cover on the back side of the turntable.
Remove the magnet cover before fitting to the main unit.
Attention
・ Keep any magnetic-sensitive object such as a magnetic card and watch away from the magnet.
・ Prevent the turntable from hitting the main unit or falling off.
Prevent dust or iron powder from adhering to the magnet on the back side.
・ Do not touch the fixing screws (three locations) of the turntable.
The rating performance cannot be guaranteed if they are out of position.
English
Read before use
FRONT styrofoam
( " Before fitting the turntable" on page 15)
Back side of the turntable
Magnet
Direct Drive Turntable System
Model No.
Connecting the PHONO earth lead to the
player and amplifier.
 Turn the terminal to the left
to loosen.
 Insert the earth lug and tighten
the terminal securely.
Magnet cover
Fixing
screw
SL-1200GR
(Red)
(White)
(Black)
TQBM7019
S0217AK0

Publicité

loading

Sommaire des Matières pour Technics SL-1200GR

  • Page 1 Read before use Direct Drive Turntable System SL-1200GR Model No. ■ Make connection to the PHONO terminals and AC IN terminal before setting up or installing the player. Connecting to the PHONO terminals and AC IN terminal  Take out the player from the package, attach the “FRONT styrofoam” and place the player with its front side down so that you can make connection to the PHONO terminals and AC IN terminal on the back side.
  • Page 2 Lire avant utilisation Platine tourne-disque à entraînement direct SL-1200GR Modèle N° ■ Réaliser la connexion aux bornes PHONO et au connecteur d’entrée c.a. avant de configurer ou d’installer le lecteur Raccordement aux bornes PHONO et au connecteur d’entrée c.a. ...