Exquisit HT3201swp Mode D'emploi page 13

Inevitably the air intake grille becomes hot when

using the appliance. Make sure the cord does not
come into contact with the air intake grille when
using the appliance.
The air intake and outgoing openings must never

be blocked. However, should the air ventilation
get blocked, the safety device will stop the
appliance immediately. The latter will restart
when it has cooled down. You will have to wait a
couple of minutes.
The safety grille in the air intake opening prevents

the hairs from being sucked in. If you notice after
some time that the grille gets blocked by dust, you
have to clean it. If you don't clean it, the air flux will
progressively decrease and the appliance might
get damaged.
Make sure the hair does not come into direct

contact with the air intake opening.
(*) Competent qualified electrician: after-sales
department of the producer or importer or any
person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all
danger. In case of need you should return the
appliance to this electrician (www.ggv-service.de).
BEFORE THE FIRST OPERATION
Your appliance can function with 2 voltages (visible by a small 2-position switch graded to the
2 most frequent voltages which is situated at the back of the appliance). You have to verify
that the tension switch is set to the position that corresponds with the voltage of your region.
Otherwise the appliance might suffer serious damages that will not be covered by the
guarantee.
13