BH Technovita Zentromax YM921N Mode D'emploi Et Garantie page 12

3. Press the On/Off switch at the back of the device
4. Press the On/Off button on the control panel.
5. Select the desired massage settings by using the buttons on the control
panel.
For best results, 15-30 minutes continuous use is recommended.
The appliance will switch off automatically after 15 minutes of use.
NOTE: Before plugging the cable into the mains supply, make sure the
on/off switch at the rear of the unit is in the 0 position.
If you do not notice any heat when the heat function is on, make sure the
cable on the heat pad is not loose.
MAINTENANCE
1. Make sure the device is not connected to the mains supply before attempting to
clean it.
2. Clean the device with a damp cloth (chemicals such as detergents, alcohol or
solvents should not be used to clean the device).
3. Use a dry cloth to dry the device.
4. Allow the device to dry naturally, do not use other methods to dry the device
quickly.
5. Do not store the device in high temperatures, do not expose the device to
direct sunlight or where there are corrosive gases.
6. Keep the device away from moisture, dust or smoke.
The cloth covers can be removed for easier cleaning.
TRANSPORTATION