Aspira ASPIRVELO AIR ECOCOMFORT Série Manuel D'utilisation Et D'installation page 15

4. Slide the inner tube
with respect to the
outer tube until it is
flush with the wall of
the room (Figure 5)
8. INSTALLATION OF THE TELESCOPIC TUBE, GRILL AND HEAT EXCHANGER
1. Wait until the mortar sets.
2. Place the rack "inside out" compressing the springs on the external tube (Figure 6)
3. Secure the grill
4. Place the heat exchanger at the extremity of the inner tube. (Figure 7)
ROOM
INTERNAL TUBE
FLUSH WITH THE WALL
OF THE ROOM
TUBE
INTERNAL
EXTERNAL TUBE
SPRINGS
E N G L I S H
ECOCOMFORT Series
EXTERNAL
TUBE EXTERNAL TUBE
EXTERNAL FLUSH WITH THE WALL
WIRE EXCHANGER
WITH INTERNAL TUBE
Figure 5
Figure 6
Figure 7
15