Cleaning, Care & Maintenance; Troubleshooting - Buffalo CC770 Mode D'emploi

UK
Cleaning, Care & Maintenance
• Always allow to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
WARNING: Do not allow any water to spill into the appliance when cleaning.

Troubleshooting

Fault
The unit is not working
The unit is not working - 'E'
flashes on the display
The unit is not working - '0'
flashes on the display
Appliance does not remove all
the air from the bag
Bags are not sealing correctly
5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse has blown
Power supply
Internal wiring fault
Safety cut-out activated
'Lid closed' switch faulty
Open end of bag not
completely inserted
Gaskets dirty
Open end of bag is dirty
Bag may be punctured
Incorrect bags used
Suction nozzle blocked
Sealing bar is overheating
Incorrect Sealing Time set
Bag too thick
Incorrect bags used
Action
Check the unit is plugged in correctly
and switched on
Call BUFFALO agent or qualified
technician
Replace the fuse
Check power supply
Call BUFFALO agent or qualified
technician
Allow appliance to rest for indicated
time before using again
Call BUFFALO agent or qualified
technician
Open lid and reposition bag
Clean gaskets
Clean bag
Line bag with paper towels to protect
against foodstuffs with sharp edges
Replace bag
Call Vacuum Pack machine supplier
Clear suction nozzle
Open lid and allow sealing bar to cool
down
Alter sealing time
Use thinner bag
Call Vacuum Pack machine supplier