Programmed Play; Aux In Socket; Cleaning And Maintenance - AEG SR 4375 BT Mode D'emploi

PROG / +10 (14)
• Press this button during playback to skip 10 tracks. Provid-
ed that there are more than 10 titles available.
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
REP (7)
When playing an audio CD:
Press once = (The symbol
track is repeated continuously.
Press twice = (The symbol
played continuously.
Press three times = (RANDOM appears in the display)
all titles are replayed successively in
random order.
Press four times = All functions are cancelled. The normal
play mode is resumed.
Only for CDs in MP3 format or audio fi le formats which are
playing:
Press once = (The symbol
track is repeated continuously.
Press twice = The selected folder of the MP3 CD is
repeated continuously (FOLDER
appears in the display).).
Press three times = (The symbol
played continuously.
Press four times = (RANDOM appears in the display)
all titles are replayed successively in
random order.
Press fi ve times = All functions are cancelled. The normal
play mode is resumed.

Programmed Play

This can be used to program any desired sequence of tracks.
(Only in CD / USB mode)
1. Press the PAIR button (12).
2. Press the PROG / +10 button (14). "P01" (preset location)
appears on the display and PROG fl ashes on the display.
Use the / buttons (8 / 13) to select the desired track
and then press the PROG / +10 button again. The display
changes to memory slot P 02.
3. Select the next track with the
the PROG / +10 button again. Repeat the procedure until
all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" fl ashes in the
display.
4. Press the MODE button (9). The playback starts.
The notifi cation "PROG" will appear additionally in the
display.
SR4375_IM
5. Press once the
6. To play the programme back again, press the
The device stops automatically after all programmed titles
have been played. The listed sequence remains in the mem-
ory until you switch to a different operating mode.
Deleting a programmed sequence
fl ashes) the current
To delete the program, press the
is lit) the whole CD is
notifi cation "PROG" will disappear.

AUX IN socket

For connecting to external players, e.g. MP3 player, smart-
phone, tablet PC etc.
1. Set the function switch (4) to the "CD" position.
2. For connecting to external players, e.g. MP3 player,
3. Start the playback of your audio source. You will hear the
fl ashes) the current
4. For the remaining procedure please see the operating
is lit) the whole CD is
Adjust the volume of the external device to a comfortable
level.

Cleaning and Maintenance

Do not immerse the device in water.
• Always remove the mains plug before cleaning the
• Any marks on the surface can be wiped off with a slightly
Troubleshooting
Symptoms
CD can not be
/ buttons and press
played back.
CD jumps
during play-
back.
PAIR button to stop the playback
while retaining the program.
button.
smartphone, tablet PC etc.
sound playback from the external device through the
loudspeakers. You may use the VOLUME control (16) to
adjust the volume. The CD buttons are not functional.
instructions of the external sound source.
NOTE:
CAUTION:
machine.
damp cloth without any additives.
Course
CD is not insert-
ed or inserted
incorrectly.
Batteries too
weak.
Check the disc
for fi ngerprints,
dirt or scratches.
English
39
MODE
PAIR button twice. The
Solution
Ensure that the disc is
inserted with the label
facing upwards.
Insert new batteries
or operate the device
with the mains lead.
Check the disc for
fi ngerprints, dirt or
scratches.
22.04.16