Installing The Printer Access Cover - Rimage Producer 7100 Manuel D'utilisation

Installing the printer access cover

1. With the printer access door in the open
position, place the printer access cover
on the Producer III as shown.
2. Slide the printer access cover toward
the front of the Producer III, ensuring that
the tabs on the printer access cover slide
into the slots on the Producer III frame.
3. Close the printer access door.
4. At the back of the Producer III, turn the
knob clockwise to secure the printer
access cover.
110867_A
Maintain the Producer III autoloader
Printer
Access
Cover
Producer III
Printer
Access
Door
Knob
13