Philips Senseo HD7872 Mode D'emploi page 7

Caution:
C
Never flush the machine or let it brew coffee
when the spout is not in place.
Tilt the top of the water reservoir backwards
2
(1) and lift the water reservoir off the
machine (2).
Fill the water reservoir to the top with cold
3
tap water.
Place the lid on the water reservoir before
4
you put the water reservoir back onto the
machine.
Tilt the water reservoir and place the bottom
5
back onto the machine (1). Then press the top
of the water reservoir towards the machine (2).
Remove the drip tray.
6
Place a bowl with a capacity of at least 1.5
7
litres under the coffee spout.
1.5L
Make sure a pod holder, without pod or pods,
8
is in place.
7